Technical idEas

  Instagram Facebook YouTube Code :-  /* Code Started Distance metre using by ultrasonic sensor Crated By Technical idEas YouTube Channel Link :-  https://youtube.com/channel/UCCJyR_wnt3SxhErsSUP9Wrw */ #include <LiquidCrystal.h> #define trigger 5 #define echo 6   const int rs = 7, en = 9, d4 = 10, d5 = 11, d6 = 12, d7 = 13; LiquidCrystal lcd(rs, en, d4, d5, d6, d7);   float time=0,distance=0;   void setup()     {      lcd.begin(16,2);      pinMode(trigger,OUTPUT);      pinMode(echo,INPUT);      lcd.print(" Ultra sonic");      lcd.setCursor(0,1);      lcd.print("Distance Meter");      delay(2000);      lcd.clear();      lcd.print(" Technical idEas");    delay(2000);     }   void loop()     {      lcd.clear();      digitalWrite(trigger,LOW); ...

Instagram       If there is any Problem to Create the Project, you can message on Instagram. I will reply within 24 hours.🤗  // Code Started // Created By Technical idEas(YT) // https://youtube.com/channel/UCCJyR_wnt3SxhErsSUP9Wrw int micPin = A0;          // pin that the mic is attached to int gndPin = A1; int powerPin = A2; int micValue1 = 0;   int micValue2 = 0; // the Microphone value int led1 = 13; boolean lightOn = false; void setup() {   pinMode(led1, OUTPUT);   pinMode(powerPin, OUTPUT);   pinMode(gndPin, OUTPUT);   pinMode(micPin, INPUT);   digitalWrite(gndPin,LOW);   delay(500);   digitalWrite(powerPin,HIGH);   Serial.begin(9600);  //for test the input value initialize serial } void loop() {   micValue1 = analogRead(micPin);  // read pin value   Serial.println(micValue1);   delay(1);   micValue2 = analogRead(micPin);   Serial.println(micValue2...

  Subscribe Now    Instagram   👈🏻   If there is any problem to make it, message me on Instagram and I will reply within 24 hours. Facebook                                 Arduino Code :-  /* This Code Created by Technical idEas(YT) Channel Link :-  https://youtube.com/channel/UCCJyR_wnt3SxhErsSUP9Wrw */ // include the library code: #include <LiquidCrystal.h> const int rs = 7, en = 9, d4 = 10, d5 = 11, d6 = 12, d7 = 13; LiquidCrystal lcd(rs, en, d4, d5, d6, d7); void setup() { lcd.begin(16, 2);     lcd.print(millis() / 1000); } void loop() {   lcd.setCursor(0,0);   lcd.print("Hey Friends");   delay(4000);   lcd.clear();   lcd.setCursor(0,0);   lcd.print("I am Samrat");   delay(3000);   lcd.clear();   lcd.setCursor(0,0);   lcd.print("I am a YouTuber    ");   delay(3000);   lcd.clear(); ...